***** Usage ***** ``flex_extract`` is a command-line tool. In the first versions, it was started via a korn shell script and since version 6, the entry point was a python script. From version 7.1, a bash shell script was implemented to call ``flex_extract`` with the command-line parameters. To submit an extraction job, change the working directory to the subdirectory ``Run`` (directly under the ``flex_extract_vX.X`` root directory, where ``X.X`` is the version number): .. code-block:: bash cd /Run Within this directory you can find everything you need to modify and run ``flex_extract``. The following tree shows a shortened list of directories and important files. The ``*`` serves as a wildcard. The brackets ``[]`` indicate that the file is present only in certain modes of application. .. code-block:: bash Run ├── Control │   ├── CONTROL_* ├── Jobscripts │   ├── compilejob.ksh │   ├── job.ksh │   ├── [joboper.ksh] ├── Workspace │   ├── CERA_example │   │   ├── CE000908* ├── [ECMWF_ENV] ├── run_local.sh └── run.sh The ``Jobscripts`` directory is used to store the Korn shell job scripts generated by a ``flex_extract`` run in the **Remote** or **Gateway** mode. They are used to submit the setup information to the ECMWF server and start the jobs in ECMWF's batch mode. The typical user must not touch these files. They are generated from template files which are stored in the ``Templates`` directory under ``flex_extract_vX.X``. Usually there will be a ``compilejob.ksh`` and a ``job.ksh`` script which are explained in the section :doc:`Documentation/input`. In the rare case of operational data extraction there will be a ``joboper.ksh`` which reads time information from environment variables at the ECMWF servers. The ``Controls`` directory contains a number of sample ``CONTROL`` files. They cover the current range of possible kinds of extractions. Some parameters in the ``CONTROL`` files can be adapted and some others should not be changed. In this :doc:`quick_start` guide we explain how an extraction with ``flex_extract`` can be started in the different :doc:`Documentation/Overview/app_modes` and point out some specifics of each dataset and ``CONTROL`` file. Directly under ``Run`` you find the files ``run.sh`` and ``run_local.sh`` and according to your selected :doc:`Documentation/Overview/app_modes` there might also be a file named ``ECMWF_ENV`` for the user credentials to quickly and automatically access ECMWF servers. From version 7.1 on, the ``run.sh`` (or ``run_local.sh``) script is the main entry point to ``flex_extract``. .. note:: Note that for experienced users (or users of older versions), it is still possible to start ``flex_extract`` directly via the ``submit.py`` script in directory ``flex_extract_vX.X/Source/Python``. Job preparation =============== To actually start a job with ``flex_extract`` it is sufficient to start either ``run.sh`` or ``run_local.sh``. Data sets and access modes are selected in ``CONTROL`` files and within the user section of the ``run`` scripts. One should select one of the sample ``CONTROL`` files. The following sections describes the differences in the application modes and where the results will be stored. Remote and gateway modes ------------------------ For member-state users it is recommended to use the *remote* or *gateway* mode, especially for more demanding tasks, which retrieve and convert the data on ECMWF machines; only the final output files are transferrred to the local host. Remote mode The only difference between both modes is the users working location. In the *remote* mode you have to login to the ECMWF server and then go to the ``Run`` directory as shown above. At ECMWF servers ``flex_extract`` is installed in the ``$HOME`` directory. However, to be able to start the program you have to load the ``Python3`` environment with the module system first. .. code-block:: bash # Remote mode ssh -X @ecaccess.ecmwf.int .. code-block:: bash # On ECMWF server [@ecgb11 ~]$ cd flex_extract_vX.X/Run Gateway mode For the gateway mode you have to log in on the gateway server and go to the ``Run`` directory of ``flex_extract``: .. code-block:: bash # Gateway mode ssh @ cd /Run From here on the working process is the same for both modes. For your first submission you should use one of the example ``CONTROL`` files stored in the ``Control`` directory. We recommend to extract *CERA-20C* data since they usually guarantee quick results and are best for testing reasons. Therefore open the ``run.sh`` file and modify the parameter block marked in the file as shown below: .. code-block:: bash # ----------------------------------------------------------------- # AVAILABLE COMMANDLINE ARGUMENTS TO SET # # THE USER HAS TO SPECIFY THESE PARAMETERS: QUEUE='ecgate' START_DATE=None END_DATE=None DATE_CHUNK=None JOB_CHUNK=3 BASETIME=None STEP=None LEVELIST=None AREA=None INPUTDIR=None OUTPUTDIR=None PP_ID=None JOB_TEMPLATE='jobscript.template' CONTROLFILE='CONTROL_CERA' DEBUG=0 REQUEST=2 PUBLIC=0 This would retrieve a one day (08.09.2000) *CERA-20C* dataset with 3 hourly temporal resolution and a small 1° domain over Europe. Since the ``ectrans`` parameter is set to ``1`` the resulting output files will be transferred to the local gateway into the path stored in the destination (SEE INSTRUCTIONS FROM INSTALLATION). The parameters listed in the ``run.sh`` file would overwrite existing settings in the ``CONTROL`` file. To start the retrieval you only have to start the script by: .. code-block:: bash ./run.sh ``Flex_extract`` will print some information about the job. If there is no error in the submission to the ECMWF server you will see something like this: .. code-block:: bash ---- On-demand mode! ---- The job id is: 10627807 You should get an email per job with subject flex.hostname.pid FLEX_EXTRACT JOB SCRIPT IS SUBMITED! Once submitted you can check the progress of the submitted job using ``ecaccess-job-list``. You should get an email after the job is finished with a detailed protocol of what was done. In case the job fails you will receive an email with the subject ``ERROR!`` and the job name. You can then check for information in the email or you can check on ECMWF server in the ``$SCRATCH`` directory for debugging information. .. code-block:: bash cd $SCRATCH ls -rthl The last command lists the most recent logs and temporary retrieval directories (usually ``extractXXXXX``, where XXXXX is the process id). Under ``extractXXXXX`` a copy of the ``CONTROL`` file is stored under the name ``CONTROL``, the protocol is stored in the file ``prot`` and the temporary files as well as the resulting files are stored in a directory ``work``. The original name of the ``CONTROL`` file is stored in this new file under parameter ``controlfile``. .. code-block:: bash :caption: "Example structure of ``flex_extract`` output directory on ECMWF servers." extractXXXXX ├── CONTROL ├── prot ├── work │   ├── temporary files │   ├── CE000908* (resulting files) If the job was submitted to the HPC ( ``queue=cca`` or ``queue=ccb`` ) you may login to the HPC and look into the directory ``/scratch/ms/ECGID/ECUID/.ecaccess_do_not_remove`` for job logs. The working directories are deleted after job failure and thus normally cannot be accessed. To check if the resulting files are still transferred to local gateway server you can use the command ``ecaccess-ectrans-list`` or check the destination path for resulting files on your local gateway server. Local mode ---------- To get to know the working process and to start your first submission you could use one of the example ``CONTROL`` files stored in the ``Control`` directory as they are. For quick results and for testing reasons it is recommended to extract *CERA-20C* data. Open the ``run_local.sh`` file and modify the parameter block marked in the file as shown below. The differences are highlighted. +-----------------------------------------------+-----------------------------------------------+ | Take this for **member-state user** | Take this for **public user** | +-----------------------------------------------+-----------------------------------------------+ | .. code-block:: bash | .. code-block:: bash | | :emphasize-lines: 16,20,23 | :emphasize-lines: 16,20,23 | | | | | # -----------------------------------------| # -----------------------------------------| | # AVAILABLE COMMANDLINE ARGUMENTS TO SET | # AVAILABLE COMMANDLINE ARGUMENTS TO SET | | # | # | | # THE USER HAS TO SPECIFY THESE PARAMETERs:| # THE USER HAS TO SPECIFY THESE PARAMETERs:| | # | # | | | | | QUEUE='' | QUEUE='' | | START_DATE=None | START_DATE=None | | END_DATE=None | END_DATE=None | | DATE_CHUNK=None | DATE_CHUNK=None | | JOB_CHUNK=None | JOB_CHUNK=None | | BASETIME=None | BASETIME=None | | STEP=None | STEP=None | | LEVELIST=None | LEVELIST=None | | AREA=None | AREA=None | | INPUTDIR='./Workspace/CERA' | INPUTDIR='./Workspace/CERApublic' | | OUTPUTDIR=None | OUTPUTDIR=None | | PP_ID=None | PP_ID=None | | JOB_TEMPLATE='' | JOB_TEMPLATE='' | | CONTROLFILE='CONTROL_CERA' | CONTROLFILE='CONTROL_CERA.public' | | DEBUG=0 | DEBUG=0 | | REQUEST=0 | REQUEST=0 | | PUBLIC=0 | PUBLIC=1 | | | | +-----------------------------------------------+-----------------------------------------------+ This would retrieve a one day (08.09.2000) *CERA-20C* dataset with 3 hourly temporal resolution and a small 1° domain over Europe. The destination location for this retrieval will be within the ``Workspace`` directory within ``Run``. This can be changed to whatever path you like. The parameters listed in ``run_local.sh`` would overwrite existing settings in the ``CONTROL`` file. To start the retrieval you then start the script by: .. code-block:: bash ./run_local.sh While job submission on the local host is convenient and easy to monitor (on standard output), there are a few caveats with this option: 1. There is a maximum size of 20GB for single retrieval via ECMWF Web API. Normally this is not a problem but for global fields with T1279 resolution and hourly time steps the limit may already apply. 2. If the retrieved MARS files are large but the resulting files are relative small (small local domain) then the retrieval to the local host may be inefficient since all data must be transferred via the Internet. This scenario applies most notably if ``etadot`` has to be calculated via the continuity equation as this requires global fields even if the domain is local. In this case job submission via ecgate might be a better choice. It really depends on the use patterns and also on the internet connection speed. Selection and adjustment of ``CONTROL`` files ============================================= This section describes how to work with the ``CONTROL`` files. A detailed explanation of ``CONTROL`` file parameters and naming compositions can be found `here `_. The more accurately the ``CONTROL`` file describes the retrieval needed, the fewer command-line parameters are needed to be set in the ``run`` scripts. With version ``7.1`` all ``CONTROL`` file parameters have default values. They can be found in section `CONTROL parameters `_ or in the ``CONTROL.documentation`` file within the ``Control`` directory. Only those parameters which need to be changed for a dataset retrieval needs to be set in a ``CONTROL`` file! The limitation of a dataset to be retrieved should be done very cautiously. The datasets can differ in many ways and vary over the time in resolution and parameterisations methods, especially the operational model cycles improves through a lot of changes over the time. If you are not familiar with the data it might be useful or necessary to check for availability of data in ECMWF’s MARS: - **Public users** can use a web mask to check on data or list available data at this `Public datasets web interface `_. - **Member state users** can check availability of data online in the `MARS catalogue `_. There you can select step by step what data suits your needs. This would be the most straightforeward way of checking for available data and therefore limit the possibility of ``flex_extract`` to fail. The following figure gives an example how the web interface would look like: .. _ref-fig-mars-catalogue-ss: .. figure:: _files/MARS_catalogue_snapshot.png Additionally, you can find a lot of helpful links to dataset documentations, direct links to specific dataset web catalogues or further general information at the `link collection `_ in the ECMWF data section. ``Flex_extract`` is specialised to retrieve a limited number of datasets, namely *ERA-Interim*, *CERA-20C*, *ERA5* and *HRES (operational data)* as well as the *ENS (operational data, 15-day forecast)*. The limitation relates mainly to the dataset itself, the stream (what kind of forecast or what subset of dataset) and the experiment number. Mostly, the experiment number is equal to ``1`` to signal that the actual version should be used. The next level of differentiation would be the field type, level type and time period. ``Flex_extract`` currently only supports the main streams for the re-analysis datasets and provides extraction of different streams for the operational dataset. The possibilities of compositions of dataset and stream selection are represented by the current list of example ``CONTROL`` files. You can see this in the naming of the example files: .. code-block:: bash :caption: "Current example ``CONTROL`` files distributed with ``flex_extract``. " CONTROL_CERA CONTROL_CERA.global CONTROL_CERA.public CONTROL_EA5 CONTROL_EA5.global CONTROL_EI CONTROL_EI.global CONTROL_EI.public CONTROL_OD.ELDA.FC.eta.ens.double CONTROL_OD.ENFO.CF CONTROL_OD.ENFO.CV CONTROL_OD.ENFO.PF CONTROL_OD.ENFO.PF.36hours CONTROL_OD.ENFO.PF.ens CONTROL_OD.OPER.4V.operational CONTROL_OD.OPER.FC.36hours CONTROL_OD.OPER.FC.eta.global CONTROL_OD.OPER.FC.eta.highres CONTROL_OD.OPER.FC.gauss.highres CONTROL_OD.OPER.FC.operational CONTROL_OD.OPER.FC.twicedaily.1hourly CONTROL_OD.OPER.FC.twicedaily.3hourly The main differences and features in the datasets are listed in the table shown below: .. _ref-tab-dataset-cmp: .. figure:: _files/dataset_cmp_table.png A common problem for beginners in retrieving ECMWF datasets is a mismatch in the choice of values for these parameters. For example, if you try to retrieve operational data for 24 June 2013 or earlier and set the maximum level to 137, you will get an error because this number of levels was introduced only on 25 June 2013. Thus, be careful in the combination of space and time resolution as well as the field types. .. note:: Sometimes it might not be clear how specific parameters in the control file must be set in terms of format. Please consult the description of the parameters in section `CONTROL parameters `_ or have a look at the ECMWF user documentation for `MARS keywords `_ In the following, we shortly discuss the typical retrievals for the different datasets and point to the respective ``CONTROL`` files. Public datasets --------------- The main characteristic in the definition of a ``CONTROL`` file for a public dataset is the parameter ``DATASET``. Its specification enables the selection of a public dataset in MARS. Without this parameter, the request would not find the dataset. For the two public datasets *CERA-20C* and *ERA-Interim* an example file with the ending ``.public`` is provided and can be used straightaway. .. code-block:: bash CONTROL_CERA.public CONTROL_EI.public For *CERA-20C* it seems that there are no differences compared the full dataset, whereas the *public ERA-Interim* has only 6-hourly analysis fields, without forecasts to fill in between, for model levels. Therefore, it is only possible to retrieve 6-hourly data for *public ERA-Interim*. .. note:: In principle, *ERA5* is a public dataset. However, since the model levels are not yet publicly available, it is not possible to retrieve *ERA5* data to drive the ``FLEXPART`` model. As soon as this is possible it will be announced at the community website and on the FLEXPART user email list. CERA ---- For this dataset, it is important to keep in mind that it is available for the period 09/1901 until 12/2010, and that the temporal resolution is limited to 3 h. It is also a pure ensemble data assimilation dataset and is stored under the ``enda`` stream. There are 10 ensemble members. The example ``CONTROL`` files retrieves the first member only (``number=0``). You may change this to another number or a list of numbers (e.g. ``NUMBER 0/to/10``). Another important difference to all other datasets is that there is one forecast per day, starting at 18 UTC. The forecast lead time is 24 hours and extends beyond the calendar day. Therefore, ``flex_extract`` needs to extract also the day before the first day for which data are desired, which is handled automatically. ERA 5 ----- This is the latest re-analysis dataset, and has a temporal resolution of 1-h (analysis fields). At the time of writing, it is available until April 2019 with regular release of new months. The original horizontal resolution is 0.28125° which needs some caution in the definition of the domain, since the length of the domain in longitude or latitude direction must be an integer multiple of the resolution. It is also possible to use ``0.25`` for the resolution; MARS will then automatically interpolate to this resolution which is still close enough to be acceptable. The forecast starting time is ``06/18 UTC`` which is important for the flux data. Correspondingly, one should set in the ``CONTROL`` file ``ACCTIME 06/18``, ``ACCMAXSTEP 12``, and ``ACCTYPE FC``. .. note:: *ERA5* also includes an ensemble data assimilation system but related fields are not yet retrievable with ``flex_extract`` since the deaccumulation of the flux fields works differently in this stream. Ensemble field retrieval for *ERA5* is a *to-do* for the future. ERA-Interim ----------- The production of this re-analysis dataset has stopped on 31 August 2019! It is available for the period from 1 January 1979 to 31 August 2019. The ``etadot`` parameter is not available in this dataset. Therefore, one must use the ``GAUSS`` parameter, which retrieves the divergence field in addition and calculates the vertical velocity from the continuity equation in the Fortran program ``calc_etadot``. While the analysis fields are only available for every 6th hour, the dataset can be made 3-hourly by adding forecast fields in between. No ensemble members are available. Operational data ---------------- This data set provides the output of the real-time atmospheric model runs in high resolution, including 10-day forecasts. The model undergoes frequent adaptations and improvements. Thus, retrieving data from this dataset requires extra attention in selecting correct settings of the parameters. See :ref:`[Table of datasets]` for the most important parameters. Currently, fields can be retrieved at 1 h temporal resolution by filling the gaps between analysis fields with 1-hourly forecast fields. Since 4 June 2008, the eta coordinate vertical velocity is directly available from MARS, therefore ``ETA`` should be set to ``1`` to save computation time. The horizontal resolution can be up to ``0.1°`` and in combination with ``137`` vertical levels can lead to problems in terms of job duration and disk space quota. It is recommended to submit such high resolution cases as single day retrievals (see ``JOB_CHUNK`` parameter in ``run.sh`` script) to avoid job failures due to exceeding limits. ``CONTROL`` files for standard retrievals with a mix of analysis and forecast fields are listed below: .. code-block:: bash CONTROL_OD.OPER.4V.eta.global CONTROL_OD.OPER.FC.eta.global CONTROL_OD.OPER.FC.eta.highres CONTROL_OD.OPER.FC.gauss.highres These files defines the minimum number of parameters necessary to retrieve a daily subset. The given settings for the TYPE parameter are already optimised, and should only be changed if you know what you are doing. Grid, domain, and temporal resolution may be changed according to availability. .. note:: Please see `Information about MARS retrievement `_ for hints about retrieval efficiency and troubleshooting. Long forecast It is possible to retrieve long forecasts exceeding one day. The forecast period available depends on the date and forecast field type. Please use MARS catalogue to check the availability. Below are some examples for 36 hour forecasts of *Forecast (FC)*, *Control forecast (CF)* and *Calibration/Validation forecast (CV)*. The *CV* field type was only available 3-hourly from 2006 up to 2016. It is recommended to use the *CF* type since this is available from 1992 (3-hourly) on up to today (1-hourly). *CV* and *CF* field types belong to the *Ensemble prediction system (ENFO)* which currently works with 50 ensemble members. Please be aware that in this case it is necessary to set the type for flux fields explicitly, otherwise a default value might be selected, different from what you expect! .. code-block:: bash CONTROL_OD.ENFO.CF.36hours CONTROL_OD.ENFO.CV.36hours CONTROL_OD.OPER.FC.36hours Half-day retrievals If a forecast is wanted for half a day only, this can be done by substituting the analysis fields by forecast fields as shown in files with ``twicedaily`` in their name. They produce a full-day retrieval with pure 12 hour forecasts, twice a day. It is also possible to use the operational version which would obtain the time information from ECMWF's environment variables and therefore use the newest forecast for each day. This version uses a ``BASETIME`` parameter which tells MARS to extract the exact 12 hours up to the selected date. If the ``CONTROL`` file with ``basetime`` in the filename is used, this can be done for any other date, too. .. code-block:: bash CONTROL_OD.OPER.FC.eta.basetime CONTROL_OD.OPER.FC.operational CONTROL_OD.OPER.FC.twicedaily.1hourly CONTROL_OD.OPER.FC.twicedaily.3hourly Ensemble members The retrieval of ensemble members was already mentioned in the pure forecast section and for *CERA-20C* data. This ``flex_extract`` version allows to retrieve the *Ensemble Long window Data Assimilation (ELDA)* stream from the operational dataset. Until May 2019, there were 25 ensemble members and a control run (``number 0``). Starting with June 2019, the number of ensemble members has been increased to 50. Therefore, we created the option to create 25 additional "pseudo-ensemble members" for periods before June 2019. The original 25 members from MARS are taken, and the difference between the member value and the control value is subtracted twice. This is done if the parameter ``DOUBLEELDA`` is included and set it to ``1``. .. code-block:: bash CONTROL_OD.ELDA.FC.eta.ens.double CONTROL_OD.ENFO.PF.ens Specific features ----------------- rrint Selects the disaggregation scheme for precipitation flux: old (``0``) or new (``1``). See :doc:`Documentation/disagg` for explanation. cwc If present and set to ``1``, the total cloud water content will be retrieved in addition. This is the sum of cloud liquid and cloud ice water content. addpar With this parameter. an additional list of 2-dimensional, non-flux parameters can be retrieved. Use the format ``param1/param2/.../paramx`` to list the parameters. Please be consistent in using either the parameter IDs or the short names as defined by MARS. doubleelda Use this to double the ensemble member number by adding further disturbance to each member (to be used with 25 members). debug If set to ``1``, all temporary files are preserved. Otherwise, everything except the final output files will be deleted. request This produces an extra *csv* file ``mars_requests.csv`` where the content of each MARS request submitted within the job is stored, which is useful for debugging and documentation. Possible values are 0 for normal data retrieval, 1 for not retrieving data and just writing out the MARS requests, and 2 to retrieve data and write out requests. mailfail As a default, e-mails are sent to the mail address defined for the ECMWF user account. It is possible to overwrite this by specifying one or more e-mail addresses (comma-separated list). In order to include the e-mail associated with the user account, add ``${USER}`` to the list. Hints for proper definition of certain parameter combinations ------------------------------------------------------------- Field type and time This combination is very important. It defines the temporal resolution and which field type is extracted on each time step. The time declaration for analysis (AN) fields uses the times of the specific analysis while the (forecast time) step has to be ``0``. The forecast field types (e.g. FC, CF, CV, PF) need to declare a combination of (forescast start) time and the (forecast) step. Together they define the actual time. It is important to know the forecast starting times for the dataset to be retrieved, since they are different. In general, it is sufficient to give information for the exact time steps, but it is also possible to have more time step combinations of ``TYPE``, ``TIME`` and ``STEP`` because the temporal (hourly) resolution with the ``DTIME`` parameter will select the correct combinations. .. code-block:: bash :caption: Example of a setting for the field types and temporal resolution. It will retrieve 3-hourly fields, with analyses at 00 and 12 UTC and the corresponding forecasts inbetween. DTIME 3 TYPE AN FC FC FC AN FC FC FC TIME 00 00 00 00 12 12 12 12 STEP 00 03 06 09 00 03 06 09 Vertical velocity The vertical velocity for ``FLEXPART`` is not directly available from MARS and has to be calculated. There are several options for this, and the following parameters are responsible for the selection. See :doc:`Documentation/vertco` for a detailed explanation. Using ``ETADIFF 1``, ``OMEGA 1`` and ``OMEGADIFF 1`` is recommended for debugging and testing only. Usually, one has to decide between ``GAUSS 1`` and ``ETA 1``. ``GAUSS 1`` means that spectral fields of the horizontal wind fields and the divergence are retrieved and that the vertical velocity is calculate using the continuity equation. ``ETA 1`` means that horizontal wind fields etadot are retrieved on a regular lat-lon grid. It is recommended to use ``ETA 1`` where possible, as there is a substantial computational overhead for solving the continuity equation. .. code-block:: bash :caption: Example setting for the vertical coordinate retrieval (recommended if etadot fields are available). GAUSS 0 ETA 1 ETADIFF 0 DPDETA 1 OMEGA 0 OMEGADIFF 0 Grid resolution and domain The grid and domain parameters depends on each other. ``grid`` refers to the grid resolution. It can be given as decimal values (e.g., ``1.`` meaning 1.0°), or as in previous versions of flex_extract, as integer values refering to 1/1000 degrees (e.g., ``1000`` means also 1°). The code applies common sense to determine what format is to be assumed. After selecting grid, the ``domain`` has to be defined. The extension in longitude or latitude direction must be an integer multiple of ``grid``. The horizontal resolution for spectral fields is set by the parameter ``RESOL``. For information about how to select an appropriate value please read the explanation of the MARS keyword RESOL as found `in this entry of the ECMWF on-line documentation `_ and `this table (also ECMWF documentation) `_. .. code-block:: bash :caption: Example setting for a domain covering the northern hemisphere domain with a grid resolution of ``0.25°``. GRID 0.25 RESOL 799 SMOOTH 0 UPPER 90. LOWER 0. LEFT -179.75 RIGHT 180. Flux data Flux fields are always forecast fields and contain values of the fluxes accumulated since the start of the respective forecast. As certain re-analysis dataset cover all time steps with analysis fields, it was necessary to define a new parameter set for the definition of the flux fields. The following parameters are used specifically for flux fields. ``ACCTYPE`` is the field type (must be a type of forecast), ``ACCTIME`` the forecast starting time, and ``ACCMAXSTEP`` the maximum forecast step;``DTIME`` the temporal resolution. ACCTYPE is assumed to be the same during the whole period given by ACCTIME and ACCMAXSTEP. These values will be set automatically if not provided in a ``CONTROL`` file. .. code-block:: bash :caption: Example setting for the definition of flux fields. DTIME 3 ACCTYPE FC ACCTIME 00/12 ACCMAXSTEP 36 .. toctree:: :hidden: :maxdepth: 2 .. user_guide/oper_modes .. user_guide/ecmwf .. user_guide/how_to .. user_guide/control_templates