!*********************************************************************** !* Copyright 2012,2013 * !* Jerome Brioude, Delia Arnold, Andreas Stohl, Wayne Angevine, * !* John Burkhart, Massimo Cassiani, Adam Dingwell, Richard C Easter, Sabine Eckhardt,* !* Stephanie Evan, Jerome D Fast, Don Morton, Ignacio Pisso, * !* Petra Seibert, Gerard Wotawa, Caroline Forster, Harald Sodemann, * !* * !* This file is part of FLEXPART WRF * !* * !* FLEXPART is free software: you can redistribute it and/or modify * !* it under the terms of the GNU General Public License as published by* !* the Free Software Foundation, either version 3 of the License, or * !* (at your option) any later version. * !* * !* FLEXPART is distributed in the hope that it will be useful, * !* but WITHOUT ANY WARRANTY; without even the implied warranty of * !* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * !* GNU General Public License for more details. * !* * !* You should have received a copy of the GNU General Public License * !* along with FLEXPART. If not, see . * !*********************************************************************** subroutine outgrid_init_reg() !******************************************************************************* ! * ! Note: This is the FLEXPART_WRF version of subroutine outgrid_init. * ! The computational grid is the WRF x-y grid rather than lat-lon. * ! * ! This routine calculates, for each grid cell of the output grid, the * ! volume, the surface area, and the areas of the northward and eastward * ! facing surfaces. * ! * ! Author: A. Stohl * ! * ! 7 August 2002 * ! * ! 26 Oct 2005, R. Easter - changes in gridarea, areaeast, areanorth * ! associated with WRF horizontal grid. * ! Dec 2005, R. Easter - changed names of "*lon0*" & "*lat0*" variables * ! July 2012, J. Brioude - modified for regular output grid * !******************************************************************************* ! * ! Variables: * ! * ! area surface area of all output grid cells * ! areaeast eastward facing wall area of all output grid cells * ! areanorth northward facing wall area of all output grid cells * ! volume volumes of all output grid cells * ! * !******************************************************************************* use flux_mod use oh_mod use unc_mod use outg_mod use par_mod use com_mod ! include 'includepar' ! include 'includecom' implicit none integer :: ix,jy,kz,k,i,nage,l,iix,jjy,ixp,jyp,i1,j1,j,ngrid real :: ylat,gridarea,ylatp,ylatm,hzone,cosfact,cosfactm,cosfactp real :: ymet,xlon real :: xmet,xl,yl,ddx,ddy,rddx,rddy,p1,p2,p3,p4,xtn,ytn,oroh integer :: ks,kp,stat real,parameter :: eps=nxmax/3.e5 ! Compute surface area and volume of each grid cell: area, volume; ! and the areas of the northward and eastward facing walls: areaeast, areanorth !*********************************************************************** do jy=0,numygrid-1 ylat=outlat0+(float(jy)+0.5)*dyoutl ylatp=ylat+0.5*dyoutl ylatm=ylat-0.5*dyoutl if ((ylatm.lt.0).and.(ylatp.gt.0.)) then hzone=dyoutl*r_earth*pi180 else cosfact=cos(ylat*pi180)*r_earth cosfactp=cos(ylatp*pi180)*r_earth cosfactm=cos(ylatm*pi180)*r_earth if (cosfactp.lt.cosfactm) then hzone=sqrt(r_earth**2-cosfactp**2)- & sqrt(r_earth**2-cosfactm**2) else hzone=sqrt(r_earth**2-cosfactm**2)- & sqrt(r_earth**2-cosfactp**2) endif endif ! !C Surface are of a grid cell at a latitude ylat !*********************************************** ! gridarea=2.*pi*r_earth*hzone*dxoutl/360. ! for FLEXPART_WRF, dx & dy are in meters, and no cos(lat) is needed ! ??? maybe should incorporate map factor here, ! and also for areaeast & areanorth ??? ! gridarea=dxout*dyout do ix=0,numxgrid-1 area(ix,jy)=gridarea ! Volume = area x box height !*************************** volume(ix,jy,1)=area(ix,jy)*outheight(1) ! for FLEXPART_WRF, dx & dy are in meters, and no cos(lat) is needed areaeast(ix,jy,1)=dyoutl*r_earth*pi180*outheight(1) areanorth(ix,jy,1)=cos(ylat*pi180)*dxoutl*r_earth*pi180* & outheight(1) ! areaeast(ix,jy,1)=dyout*outheight(1) ! areanorth(ix,jy,1)=dxout*outheight(1) do kz=2,numzgrid areaeast(ix,jy,kz)=dyoutl*r_earth*pi180* & (outheight(kz)-outheight(kz-1)) areanorth(ix,jy,kz)=cos(ylat*pi180)*dxoutl*r_earth*pi180* & (outheight(kz)-outheight(kz-1)) ! areaeast(ix,jy,kz)=dyout*(outheight(kz)-outheight(kz-1)) ! areanorth(ix,jy,kz)=dxout*(outheight(kz)-outheight(kz-1)) volume(ix,jy,kz)=area(ix,jy)*(outheight(kz)-outheight(kz-1)) end do end do end do !****************************************************************** ! Determine average height of model topography in output grid cells !****************************************************************** ! Loop over all output grid cells !******************************** do jjy=0,numygrid-1 do iix=0,numxgrid-1 oroh=0. ! Take 100 samples of the topography in every grid cell !****************************************************** do j1=1,10 ! for FLEXPART_WRF, x & y coords are in meters, ! and the lon & lat variables below are in meters. ylat=outlat0+(float(jjy)+float(j1)/10.-0.05)*dyoutl !in degrees ! ymet=out_ym0+(real(jjy)+real(j1)/10.-0.05)*dyout ! yl=(ymet-ymet0)/dy do i1=1,10 xlon=outlon0+(float(iix)+float(i1)/10.-0.05)*dxoutl !in degrees call ll_to_xymeter_wrf(xlon,ylat,xmet,ymet) yl=(ymet-ymet0)/dy xl=(xmet-xmet0)/dx ! xmet=out_xm0+(real(iix)+real(i1)/10.-0.05)*dxout ! xl=(xmet-xmet0)/dx ! Determine the nest we are in !***************************** ngrid=0 do j=numbnests,1,-1 if ((xl.gt.xln(j)).and.(xl.lt.xrn(j)).and. & (yl.gt.yln(j)).and.(yl.lt.yrn(j))) then ngrid=j goto 43 endif end do 43 continue ! Determine (nested) grid coordinates and auxiliary parameters used for interpolation !************************************************************************************ if (ngrid.gt.0) then xtn=(xl-xln(ngrid))*xresoln(ngrid) ytn=(yl-yln(ngrid))*yresoln(ngrid) ix=int(xtn) jy=int(ytn) ddy=ytn-real(jy) ddx=xtn-real(ix) else ix=int(xl) jy=int(yl) ddy=yl-real(jy) ddx=xl-real(ix) endif ixp=ix+1 jyp=jy+1 rddx=1.-ddx rddy=1.-ddy p1=rddx*rddy p2=ddx*rddy p3=rddx*ddy p4=ddx*ddy if (ngrid.gt.0) then oroh=oroh+p1*oron(ix ,jy ,ngrid) & + p2*oron(ixp,jy ,ngrid) & + p3*oron(ix ,jyp,ngrid) & + p4*oron(ixp,jyp,ngrid) else oroh=oroh+p1*oro(ix ,jy) & + p2*oro(ixp,jy) & + p3*oro(ix ,jyp) & + p4*oro(ixp,jyp) endif end do end do ! Divide by the number of samples taken !************************************** oroout(iix,jjy)=oroh/100. end do end do ! if necessary allocate flux fields if (iflux.eq.1) then allocate(flux(6,0:numxgrid-1,0:numygrid-1,numzgrid, & 1:nspec,1:maxpointspec_act,1:nageclass),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate flux array ' endif !write (*,*) 'allocating: in a sec',OHREA if (OHREA.eqv..TRUE.) then ! write (*,*) 'allocating: ',maxxOH,maxyOH,maxzOH allocate(OH_field(12,0:maxxOH-1,0:maxyOH-1,maxzOH) & ,stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate OH array ' allocate(OH_field_height(7) & ,stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate OH array ' endif ! gridunc,griduncn uncertainty of outputted concentrations allocate(gridunc(0:numxgrid-1,0:numygrid-1,numzgrid,maxspec, & maxpointspec_act,nclassunc,maxageclass),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' print*,'alloc gridunc',numxgrid-1,numygrid-1,numzgrid,maxspec, & maxpointspec_act,nclassunc,maxageclass if (ldirect.gt.0) then allocate(wetgridunc(0:numxgrid-1,0:numygrid-1,maxspec, & maxpointspec_act,nclassunc,maxageclass),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' allocate(drygridunc(0:numxgrid-1,0:numygrid-1,maxspec, & maxpointspec_act,nclassunc,maxageclass),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' allocate(drygridunc2(0:numxgrid-1,0:numygrid-1,maxspec, & maxpointspec_act,nclassunc,maxageclass),stat=stat) endif !write (*,*) 'Dimensions for fields', numxgrid,numygrid, & ! maxspec,maxpointspec_act,nclassunc,maxageclass write (*,*) ' Allocating fields for nested and global output (x,y): ', & max(numxgrid,numxgridn),max(numygrid,numygridn) ! allocate fields for concoutput with maximum dimension of outgrid ! and outgrid_nest allocate(gridsigma(0:max(numxgrid,numxgridn)-1, & 0:max(numygrid,numygridn)-1,numzgrid),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' allocate(grid(0:max(numxgrid,numxgridn)-1, & 0:max(numygrid,numygridn)-1,numzgrid),stat=stat) allocate(grid2(0:max(numxgrid,numxgridn)-1, & 0:max(numygrid,numygridn)-1,numzgrid,maxpointspec_act),stat=stat) allocate(grid3(0:max(numxgrid,numxgridn)-1, & 0:max(numygrid,numygridn)-1,numzgrid,maxpointspec_act),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' allocate(densityoutgrid(0:max(numxgrid,numxgridn)-1, & 0:max(numygrid,numygridn)-1,numzgrid),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' allocate(factor3d(0:max(numxgrid,numxgridn)-1, & 0:max(numygrid,numygridn)-1,numzgrid),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' allocate(sparse_dump_r(max(numxgrid,numxgridn)* & max(numygrid,numygridn)*numzgrid),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' allocate(sparse_dump_i(max(numxgrid,numxgridn)* & max(numygrid,numygridn)*numzgrid),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' ! deposition fields are only allocated for forward runs if (ldirect.gt.0) then allocate(wetgridsigma(0:max(numxgrid,numxgridn)-1, & 0:max(numygrid,numygridn)-1),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' allocate(drygridsigma(0:max(numxgrid,numxgridn)-1, & 0:max(numygrid,numygridn)-1),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' allocate(wetgrid(0:max(numxgrid,numxgridn)-1, & 0:max(numygrid,numygridn)-1),stat=stat) allocate(wetgrid2(0:max(numxgrid,numxgridn)-1, & 0:max(numygrid,numygridn)-1,maxpointspec_act),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' allocate(drygrid(0:max(numxgrid,numxgridn)-1, & 0:max(numygrid,numygridn)-1),stat=stat) allocate(drygrid2(0:max(numxgrid,numxgridn)-1, & 0:max(numygrid,numygridn)-1,maxpointspec_act),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate gridunc' endif ! Initial condition field if (linit_cond.gt.0) then allocate(init_cond(0:numxgrid-1,0:numygrid-1,numzgrid,maxspec, & maxpointspec_act),stat=stat) if (stat.ne.0) write(*,*)'ERROR: could not allocate init_cond' endif !************************ ! Initialize output grids !************************ do ks=1,nspec do kp=1,maxpointspec_act do i=1,numreceptor ! Receptor points creceptor(i,ks)=0. end do do nage=1,nageclass do jy=0,numygrid-1 do ix=0,numxgrid-1 do l=1,nclassunc ! Deposition fields if (ldirect.gt.0) then wetgridunc(ix,jy,ks,kp,l,nage)=0. drygridunc(ix,jy,ks,kp,l,nage)=0. endif do kz=1,numzgrid if (iflux.eq.1) then ! Flux fields do i=1,5 flux(i,ix,jy,kz,ks,kp,nage)=0. end do endif ! Initial condition field if ((l.eq.1).and.(nage.eq.1).and.(linit_cond.gt.0)) & init_cond(ix,jy,kz,ks,kp)=0. ! Concentration fields gridunc(ix,jy,kz,ks,kp,l,nage)=0. end do end do end do end do end do end do end do end subroutine outgrid_init_reg